| Дата публикации | Название | Авторы |
| 2023 | Amaranthus Biochar-Based Microbial Cell Composites for Alleviation of Drought and Cadmium Stress: A Novel Bioremediation Approach | Tripti; Kumar, A.; Maleva, M.; Borisova, G.; Rajkumar, M. |
| 2023 | Application of Artificial Neural Networks in Dairy Products and Biosensors in Drying Products | Hosseinvand, A.; Rabi, M. N. F.; Haidari, A.; Kumar, A.; Amruddin, M. |
| 2020 | Assessment of potentially toxic elements in the coal dust and its accumulation by two dominant tree species Albizia lebbeck and Madhuca longifolia grown on reclaimed coal mine dumps | Raj, D.; Kumar, A.; Maiti, S. K. |
| 2021 | Bioaugmentation with copper tolerant endophyte Pseudomonas lurida strain EOO26 for improved plant growth and copper phytoremediation by Helianthus annuus | Kumar, A.; Tripti; Voropaeva, O.; Maleva, M.; Panikovskaya, K.; Borisova, G.; Rajkumar, M.; Bruno, L. B. |
| 2022 | Biofertilizer Based on Biochar and Metal-Tolerant Plant Growth Promoting Rhizobacteria Alleviates Copper Impact on Morphophysiological Traits in Brassica napus L. | Kumar, A.; Borisova, G.; Maleva, M.; Tripti; Shiryaev, G.; Tugbaeva, A.; Sobenin, A.; Kiseleva, I. |
| 2024 | Biosurfactants in biocorrosion and corrosion mitigation of metals: An overview | Sivakumar, D.; Ramasamy, R.; Thiagarajan, Y. R.; Thirumalairaj, B.; Krishnamoorthy, U.; Haque, Siddiqui, M. I.; Lakshmaiya, N.; Kumar, A.; Shah, M. A. |
| 2023 | Central composite design application in the optimization of the effect of pumice stone on lightweight concrete properties using RSM | Ali, M.; Kumar, A.; Yvaz, A.; Salah, B. |
| 2021 | Changes in soil properties and carbon fluxes following afforestation and agriculture in tropical forest | Ahirwal, J.; Kumari, S.; Singh, A. K.; Kumar, A.; Maiti, S. K. |
| 2022 | Comparative Analysis for a Solar Tracking Mechanism of Solar PV in Five Different Climatic Locations in South Indian States: A Techno-Economic Feasibility | Praveenkumar, S.; Gulakhmadov, A.; Kumar, A.; Safaraliev, M.; Chen, X. |
| 2020 | A comparative study of Epipactis atrorubens in two different forest communities of the Middle Urals, Russia | Filimonova, E.; Lukina, N.; Glazyrina, M.; Borisova, G.; Tripti; Kumar, A.; Maleva, M. |
| 2016 | Comparative study on bioaccumulation and translocation of metals in Bermuda grass (Cynodon Dactylon) naturally growing on fly ash lagoon and topsoil | Maiti, S. K.; Kumar, A.; Ahirwal, J.; Das, R. |
| 2024 | A CONSORTIUM OF METAL-TOLERANT BACTERIA FOR THE DEVELOPMENT OF BIOLOGICAL PRODUCTS THAT STIMULATE GROWTH AND INCREASE PLANT RESISTANCE | Kiseleva, I. S.; Maleva, M. G.; Borisova, G. G.; Darkazanli, M.; Kumar, A.; Tripti |
| 2023 | Critical review on advancements on the fiber-reinforced composites: Role of fiber/matrix modification on the performance of the fibrous composites | Sharma, H.; Kumar, A.; Rana, S.; Sahoo, N. G.; Jamil, M.; Kumar, R.; Sharma, S.; Li, C.; Kumar, A.; Eldin, S. M.; Abbas, M. |
| 2024 | Design and performance analysis of hydrogen-fueled micro combustion chamber with focus on back pressure minimization | Shah, R.; Chaudhary, V.; Kumar, M.; Shaik, F.; Kulshrestha, D.; Sonawane, C.; Saxena, P.; Oza, A.; Kumar, A. |
| 2024 | Development and implementation of a Python functions for automated chemical reaction balancing | Dumka, P.; Chauhan, R.; Mishra, D. R.; Shaik, F.; Govindaraj, P.; Kumar, A.; Sonawane, C.; Velkin, V. I. |
| 2020 | Effect of biochar on the growth of Ricinus communis grown on copper smelter waste: A pot scale study | Tripti; Kumar, A.; Maleva, M.; Borisova, G.; Kiseleva, I.; Rajkumar, M. |
| 2020 | Effect of fast-growing trees on soil properties and carbon storage in an afforested coal mine land (India) | Ahirwal, J.; Kumar, A.; Maiti, S. K. |
| 2023 | Effect of nano-TiO2 particles addition on dissimilar AA2024 and AA2014 based composite developed by friction stir process technique | Dwivedi, S. P.; Sharma, S.; Li, C.; Zhang, Y.; Kumar, A.; Singh, R.; Eldin, S. M.; Abbas, M. |
| 2024 | Effect of PGPR Arthrobacter sp. CTF1 and foliar iodine spraying on pea microgreens growth in hydroponic culture | Maleva, M.; Borisova, G.; Ahamuefule, C.; Darkazanli, M.; Kumar, A. |
| 2023 | Effect of Pulsation in Microstructure and Mechanical Properties of Titanium Alloy-Annealed Welded Joints at Different Temperatures | Kumar, U.; Chattopadhyaya, S.; Das, A. K.; Seikh, A. H.; Sharma, S.; Dwivedi, S. P.; Nagai, K.; Kumar, A.; Agrawal, A.; Singh, S. |
| 2023 | Enhancement in wear-resistance of 30MNCRB5 boron steel-substrate using HVOF thermal sprayed WC–10%Co–4%Cr coatings: a comprehensive research on microstructural, tribological, and morphological analysis | Kumar, R.; Sharma, S.; Singh, J. P.; Gulati, P.; Singh, G.; Dwivedi, S. P.; Li, C.; Kumar, A.; Tag-Eldin, E. M.; Abbas, M. |
| 2024 | Enhancing tribo-mechanical, microstructural morphology, and corrosion performance of AZ91D-magnesium composites through the synergistic reinforcements of silicon nitride and waste glass powder | Sharma, S.; Dwivedi, S. P.; Kumar, A.; Awwad, F. A.; Khan, M. I.; Ismail, E. A. A. |
| 2023 | Experimental analysis and optimization of abrasive waterjet deep hole drilling process parameters for SS AISI 316L | Chandar, J, B.; Lenin, N.; Kumar, S.; Gupta, N. K.; Karthick, A.; Suriyan, R.; Panchal, H.; Kumar, A.; Patel, A.; Sadasivuni, K. K. |
| 2023 | Experimental investigations of electrodeposited Zn-Ni, Zn-Co, and Ni-Cr-Co-based novel coatings on AA7075 substrate to ameliorate the mechanical, abrasion, morphological, and corrosion properties for automotive applications | Sundaramali, G.; Aiyasamy, J. P.; Karthikeyan, S.; Kandavel, T. K.; Arulmurugan, B.; Rajkumar, S.; Sharma, S.; Li, C.; Dwivedi, S. P.; Kumar, A.; Singh, R.; Eldin, S. M. |
| 2023 | Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications | Miniappan, P. K.; Marimuthu, S.; Dharani, Kumar, S.; Sharma, S.; Kumar, A.; Salah, B.; Ullah, S. S. |
| 2024 | Exploring the Role of Explainable Artificial Intelligence in Decision-Making Processes for Analysational Systems | Balungu, D. M.; Wahab, Badr, Y. E. K. A.; Kumar, A. |
| 2023 | Fabrication and characterization of weld attributes in hot gas welding of alkali treated hybrid flax fiber and pine cone fibers reinforced poly-lactic acid (PLA) based biodegradable polymer composites: studies on mechanical and morphological properties | Banerjee, A.; Jha, K.; Petru, M.; Kumar, R.; Sharma, S.; Saini, M. S.; Mohammed, K. A.; Kumar, A.; Abbas, M.; Tag-Eldin, E. M. |
| 2023 | Fabrication and characterizations of glass fiber-reinforced functional leaf spring composites with or without microcapsule-based dicyclopentadiene as self-healing agent for automobile industrial applications: comparative analysis | Kumar, R.; Sharma, S.; Gulati, P.; Singh, J. P.; Jha, K.; Li, C.; Kumar, A.; Eldin, S. M.; Abbas, M. |
| 2023 | Fabrication of polypyrrole gas sensor for detection of NH3 using an oxidizing agent and pyrrole combinations: Studies and characterizations | Jain, A.; Nabeel, A. N.; Bhagwat, S.; Kumar, R.; Sharma, S.; Kozak, D.; Hunjet, A.; Kumar, A.; Singh, R. |
| 2022 | Health Risk Assessment of Children Exposed to the Soil Containing Potentially Toxic Elements: A Case Study from Coal Mining Areas | Raj, D.; Kumar, A.; Tripti; Maiti, S. K. |
| 2018 | Heavy metal and antibiotic resistant plant growth promoting rhizobacterias can act as both biofertilizer and biopesticide | Kumar, A.; Tripti, T.; Maleva, M. G.; Borisova, G. G.; Kiseleva, I. S. |
| 2016 | High dose of urea enhances the nickel and copper toxicity in Brazilian elodea (Egeria densa Planch. Casp.) | Maleva, M.; Borisova, G.; Chukina, N.; Kumar, A.; Prasad, M. N. V. |
| 2023 | Homogeneity, metallurgical, mechanical, wear, and corrosion behavior of Ni and B4C coatings deposited on 304 stainless steels developed by microwave cladding technique | Dwivedi, S. P.; Sharma, S.; Srivastava, A. P.; Sethi, V. A.; Mohammed, K. A.; Kumar, A.; Khan, M. I.; Abbas, M.; Tag-Eldin, E. M. |
| 2023 | Impact of Fine Slag Aggregates on the Final Durability of Coal Bottom Ash to Produce Sustainable Concrete | Ganesan, H.; Sachdeva, A.; Petrounias, P.; Lampropoulou, P.; Sharma, P. K.; Kumar, A. |
| 2022 | Implementation of Total Productive Maintenance Approach: Improving Overall Equipment Efficiency of a Metal Industry | Singh, S.; Agrawal, A.; Sharma, D.; Saini, V.; Kumar, A.; Praveenkumar, S. |
| 2022 | An Intelligent Logic-Based Mold Breakout Prediction System Algorithm for the Continuous Casting Process of Steel: A Novel Study | Ansari, M. O.; Ghose, J.; Chattopadhyaya, S.; Ghosh, D.; Sharma, S.; Sharma, P.; Kumar, A.; Li, C.; Singh, R.; Eldin, S. M. |
| 2013 | Intermittency, quasiperiodicity and chaos in probe-induced ferroelectric domain switching | Ievlev, A. V.; Jesse, S.; Morozovska, A. N.; Strelcov, E.; Eliseev, E. A.; Pershin, Y. V.; Kumar, A.; Shur, V. Ya.; Kalinin, S. V.; Шур, В. Я. |
| 2024 | Investigation of surface hardness, thermostability, tribo-corrosion, and microstructural morphological properties of microwave-synthesized high entropy alloy FeCoNiMnCu coating claddings on steel | Sharma, S.; Dwivedi, S. P.; Mohammed, K. A.; Kumar, A.; Awwad, F. A.; Khan, M. I.; Ismail, E. A. A. |
| 2023 | Investigation on 1-Propanol Electronic mode of fumigation on diesel engine performance and emission Fueled with diesel and lemongrass biodiesel blend using AHP- COPRAS | Manivasagam, V.; Narayanan, P.; Kuma, Gupta, N.; Shinde, T.; Panchal, H.; Thangavel, R.; Kumar, Choudhary, A.; Kumar, V.; Sukumaran, A.; Muthusamy, S.; Kumar, A.; Kuar, Sadasivuni, K. |
| 2023 | Investigation on drying kinetics analysis of gooseberry slices dried under open sun | Patel, V.; Judal, K. B.; Panchal, H.; Singh, B.; Jomde, A.; Kumar, A.; Patel, A.; Jain, R.; Sadasivuni, K. K. |
| 2023 | Investigation on topology-optimized compressor piston by metal additive manufacturing technique: Analytical and numeric computational modeling using finite element analysis in ANSYS | Selvaraj, G.; Yessian, S.; Ramalingam, S.; Dharani, Kumar, S.; Gopal, G.; Sharma, S.; Kumar, A.; Li, C.; Abbas, M. |
| 2023 | Machine learning approaches for real-time forecasting of solar still distillate output | Murugan, D. K.; Said, Z.; Panchal, H.; Gupta, N. K.; Subramani, S.; Kumar, A.; Sadasivuni, K. K. |
| 2021 | Metal and drought tolerant biochar based biofertilizer for enhanced growth of Raphanus sativus | Tripti; Kumar, A.; Darkazanli, M.; Maleva, M.; Rajkumar, M.; Bruno, L. B. |
| 2023 | The Microstructure and Properties of Ni-Si-La2O3 Coatings Deposited on 304 Stainless Steel by Microwave Cladding | Dwivedi, S. P.; Sharma, S.; Sharma, K. P.; Kumar, A.; Agrawal, A.; Singh, R.; Eldin, S. M. |
| 2024 | Multiresponse optimisation and process capability analysis of chemical vapour jet machining for the acrylonitrile butadiene styrene polymer: Unveiling the morphology | Juneja, S.; Chohan, J. S.; Kumar, R.; Sharma, S.; Alawadi, A. H.; Aggarwal, S.; Kumar, A.; Awwad, F. A.; Khan, M. I.; Ismail, E. A. A. |
| 2023 | Novel study on investigating the mechanical, microstructure morphological, and dry sliding wear characteristics of grey cast iron GG25 with copper additions for valve guides in internal combustion engine | Singh, B.; Singh, Grewal, J.; Kumar, R.; Sharma, S.; Kumar, A.; Mohammed, K. A.; Awwad, F. A.; Khan, M. I.; Ismail, E. A. A. |
| 2023 | A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum quantity lubrication | Singh, G.; Sharma, S.; Seikh, A. H.; Li, C.; Zhang, Y.; Rajkumar, S.; Kumar, A.; Singh, R.; Eldin, S. M. |
| 2023 | Numerical analysis of pile group, piled raft, and footing using finite element software PLAXIS 2D and GEO5 | Chimdesa, F. F.; Chimdesa, F. F.; Jilo, N. Z.; Hulagabali, A.; Babalola, O. E.; Tiyasha, T.; Ramaswamy, K.; Kumar, A.; Bhagat, S. K. |
| 2023 | Optimization of chemical treatment process parameters for enhancement of mechanical properties of Kenaf fiber-reinforced polylactic acid composites: A comparative study of mechanical, morphological and microstructural analysis | Kumar, S.; Dang, R.; Manna, A.; Dhiman, N. K.; Sharma, S.; Dwivedi, S. P.; Kumar, A.; Li, C.; Tag-Eldin, E. M.; Abbas, M. |
| 2024 | Optimization of surface roughness in milling of EN 24 steel with WC-Coated inserts using response surface methodology: analysis using surface integrity microstructural characterizations | Patil, S.; Sathish, T.; Rao, P. S.; Prabhudev, M. S.; Vijayan, V.; Rajkumar, S.; Sharma, S.; Kumar, A.; Abbas, M.; Makki, E. |
| 2024 | Palladium anchored to BisPyP@bilayer-SiO2@NMP organic–inorganic hybrid as an efficient and recoverable novel nanocatalyst in suzuki and stille C–C coupling reactions | Abdalrazaq, E. A.; Mohammed, H. K.; Voronkova, D. K.; Joshi, S. K.; Saleh, E. A. M.; Kareem, A. H.; Kumar, A.; Alawadi, A.; Alslaami, A.; Fathollahi, R. |
| 2023 | Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments | Singh, G.; Aggarwal, V.; Singh, S.; Singh, B.; Sharma, S.; Singh, J.; Li, C.; Królczyk, G.; Kumar, A.; Eldin, S. M. |
| 2023 | Performance, Emission, and Spectroscopic Analysis of Diesel Engine Fuelled with Ternary Biofuel Blends | Hasnain, S. M. M.; Chatterjee, R.; Ranjan, P.; Kumar, G.; Sharma, S.; Kumar, A.; Salah, B.; Ullah, S. S. |
| 2024 | PermDroid a framework developed using proposed feature selection approach and machine learning techniques for Android malware detection | Mahindru, A.; Arora, H.; Kumar, A.; Gupta, S. K.; Mahajan, S.; Kadry, S.; Kim, J. |
| 2021 | Physical, structural, and gamma ray shielding studies on novel (35+x) PbO-5TeO2-20Bi2O3-(20-x) MgO-20B2O3 glasses | A. Al-Yousef, H.; Alotiby, M.; Kumar, A.; Alotaibi, B. M.; Alsaif, N. A. M.; Sayyed, M. I.; Mahmoud, K. A.; Al-Hadeethi, Y. |
| 2022 | Plant Growth Promoting Bacteria Improve Growth and Phytostabilization Potential of Zea Mays under Chromium and Drought Stress by Altering Photosynthetic and Antioxidant Responses | Vishnupradeep, R.; Bruno, L. B.; Taj, Z.; Karthik, C.; Challabathula, D.; Tripti; Kumar, A.; Freitas, H.; Rajkumar, M. |
| 2023 | Prediction and simulation of mechanical properties of borophene-reinforced epoxy nanocomposites using molecular dynamics and FEA | Banerjee, N.; Sen, A.; Ghosh, P. S.; Biswas, A. R.; Sharma, S.; Kumar, A.; Singh, R.; Li, C.; Kaur, J.; Eldin, S. M. |
| 2018 | Ricinus communis and Calotropis procera As Putative Plant Species for the Phytostabilization of Tannery Contaminated Soil: A Dynamic Approach | Rani, P.; Kumar, A.; Arya, R. C.; Tripti, T. |
| 2022 | Soil Pollution and Plant Efficiency Indices for Phytoremediation of Heavy Metal(loid)s: Two-Decade Study (2002–2021) | Kumar, A.; Tripti; Raj, D.; Maiti, S. K.; Maleva, M.; Borisova, G. |
| 2022 | Synergism of Industrial and Agricultural Waste as a Suitable Carrier Material for Developing Potential Biofertilizer for Sustainable Agricultural Production of Eggplant | Tripti; Kumar, A.; Kumar, V.; Anshumali; Bruno, L. B.; Rajkumar, M. |
| 2021 | Synergistic Effect of ACC Deaminase Producing Pseudomonas sp. TR15a and Siderophore Producing Bacillus aerophilus TR15c for Enhanced Growth and Copper Accumulation in Helianthus annuus L | Kumar, A.; Tripti; Maleva, M.; Bruno, L. B.; Rajkumar, M. |
| 2021 | Tailoring bismuth borate glasses by incorporating PbO/GeO2 for protection against nuclear radiation | Kumar, A.; Jain, A.; Sayyed, M. I.; Laariedh, F.; Mahmoud, K. A.; Nebhen, J.; Khandaker, M. U.; Faruque, M. R. I. |
| 2022 | Techno-Economics and the Identification of Environmental Barriers to the Development of Concentrated Solar Thermal Power Plants in India | Praveenkumar, S.; Agyekum, E. B.; Kumar, A.; Ampah, J. D.; Afrane, S.; Amjad, F.; Velkin, V. I. |
| 2023 | Thermal and CFD Analyses of Sustainable Heat Storage-Based Passive Greenhouse Dryer Operating in No-Load Condition | Ahmad, A.; Prakash, O.; Sarangi, S. K.; Singh, Chauhan, P.; Chatterjee, R.; Sharma, S.; Kumar, R.; Tag, S. M.; Kumar, A.; Salah, B.; Ullah, S. S. |
| 2024 | Transforming the Digital Economy Through Artificial Intelligence: A Review of Current Trends and Future Directions | Balungu, D. M.; Kumar, A.; Badr, Y. |
| 2023 | Unravelling the analysis of electrical discharge machining process parameters, microstructural morphology, surface integrity, recast layer formation, and material properties: A comparative study of aluminum, brass, and Inconel 617 materials | Paswan, K.; Sharma, S.; Li, C.; Mohammed, K. A.; Kumar, A.; Abbas, M.; Tag-Eldin, E. M. |
| 2023 | Vanadium dioxide thin films-assisted terahertz meta-surface for simultaneous absorption, polarization conversion bi-functional switching, and wavefront operation | Wei, H.; Ge, H.; Zhao, T.; Sharma, S.; Petru, M.; Prakash, Dwivedi, S.; Kumar, A.; Abbas, M. |
| 2023 | Автоматизированная система распознавания эмоций по лицу человека с использованием разделяемой по глубине сверточной нейронной сети : магистерская диссертация | Кумар, А.; Kumar, A. |
