Please use this identifier to cite or link to this item: http://hdl.handle.net/10995/111977
Title: Hierarchical Heterostructured FeCr–(Mg–Mg2Ni) Composite with 3D Interconnected and Lamellar Structures Synthesized by Liquid Metal Dealloying
Authors: Jeong, Y. B.
Wada, T.
Joo, S. -H.
Park, J. -M.
Kim, H. S.
Okulov, I. V.
Kim, K. B.
Kato, H.
Issue Date: 2021
Publisher: Elsevier Editora Ltda
Elsevier BV
Citation: Hierarchical Heterostructured FeCr–(Mg–Mg2Ni) Composite with 3D Interconnected and Lamellar Structures Synthesized by Liquid Metal Dealloying / Y. B. Jeong, T. Wada, S. -H. Joo et al. // Journal of Materials Research and Technology. — 2021. — Vol. 15. — P. 4573-4579.
Abstract: Liquid metal dealloying (LMD) has recently attracted significant attention. Because the LMD process enables the production of three-dimensional (3D) interconnected non-noble metallic materials. In addition, the metallic melt medium is useful for the development of heterostructure (HS) metal–metal composites. However, the solidified liquid metal phase (low melting point metals such as Mg, Bi, Sn, or Cu) has a much lower strength than the developed ligament phase (e.g., Fe, FeCr, Ti, etc.). In this study, the soft Mg phase was strengthened by adding alloying element of Ni. A eutectic composition of Mg–10 at.% Ni melt leads to the formation of fine eutectic structure of (Mg–Mg2Ni) within 3D interconnected morphology. This hierarchical heterostructured composite consisted of FeCr ligament and Mg–Mg2Ni lamellar, and a high yield strength of 280 MPa and a noticeable elongation (1.5%) were achieved. The complex 3D morphology of ligament and lamellar geometrically constraint each other, and it prevents the early fracture of brittle Mg–Mg2Ni lamellar phase. The alloy design for the LMD melt gives insights for hierarchical HS materials with outstanding mechanical properties for structural applications. © 2021 The Authors.
Keywords: HETEROSTRUCTURE COMPOSITES
HIERARCHICAL STRUCTURE
LIQUID METAL DEALLOYING
MECHANICAL PROPERTIES
METAL MATRIX COMPOSITES
ALLOYING ELEMENTS
BINARY ALLOYS
DEALLOYING
EUTECTICS
IRON ALLOYS
MAGNESIUM ALLOYS
METALLIC MATRIX COMPOSITES
METALS
MORPHOLOGY
DEALLOYING
HETEROSTRUCTURE COMPOSITE
HIERARCHICAL STRUCTURES
LIQUID METAL DEALLOYING
LOW MELTING POINT
METAL PHASE
METAL-METAL COMPOSITES
METALLIC MATERIAL
METALLIC MELTS
SYNTHESISED
LIQUID METALS
URI: http://hdl.handle.net/10995/111977
Access: info:eu-repo/semantics/openAccess
SCOPUS ID: 85118200068
PURE ID: 28888667
ISSN: 2238-7854
metadata.dc.description.sponsorship: This work was supported by JSPS KAKENHI (Grant Number JP20J14001 ). Yeonbeom Jeong acknowledges the support from the GP-MS at Tohoku University . This work has supported by the National Research Foundation of Korea grant funded by the Korea government(MSIT) (No. NRF-2021R1C1C1007645 ). This work was primarily supported by a Grant-in-Aid for Scientific Research on Innovative Areas “Science of New-Class of Materials Based on Elemental Multiplicity and Heterogeneity (Grant No. 18H05452)” from the Ministry of Education, Culture, Sports, Science, and Technology (MEXT, Japan) (H.K and T.W). This work was performed under the ICC-IMR Program of the Institute for Materials Research, Tohoku University.
Appears in Collections:Научные публикации, проиндексированные в SCOPUS и WoS CC

Files in This Item:
File Description SizeFormat 
2-s2.0-85118200068.pdf1,79 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.