Please use this identifier to cite or link to this item: http://hdl.handle.net/10995/102603
Title: Study of the Manufacturing Options for an Asymmetric Plate Made of 12X18N10T Steel
Authors: Shimov, G. V.
Bushueva, N. I.
Issue Date: 2020
Publisher: IOP Publishing Ltd
Citation: Shimov G. V. Study of the Manufacturing Options for an Asymmetric Plate Made of 12X18N10T Steel / G. V. Shimov, N. I. Bushueva. — DOI 10.1088/1757-899X/969/1/012075 // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 969. — Iss. 1. — 012075.
Abstract: The analysis of possible options for manufacturing an asymmetric plate of 12X18N10T steel is presented. A phenomenological model of damage accumulation was used to analyse the probability of metal micro - and macro - destruction. The results of FEM modelling of technological processes of plate manufacturing are presented. Due to these results were made the conclusions about feasibility of their application based on the metal damage calculation. The choice of a rational technology to produce a plate is justified, in which the greatest metal ductility reserve takes place at a dangerous point. According to the proposed scheme, an experimental batch of plates have been made. © Published under licence by IOP Publishing Ltd.
URI: http://hdl.handle.net/10995/102603
Access: info:eu-repo/semantics/openAccess
SCOPUS ID: 85097428409
PURE ID: 20233094
aaef27e4-4010-494c-908a-67b00e3a9c57
ISSN: 17578981
DOI: 10.1088/1757-899X/969/1/012075
Appears in Collections:Научные публикации, проиндексированные в SCOPUS и WoS CC

Files in This Item:
File Description SizeFormat 
2-s2.0-85097428409.pdf1,11 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.