Please use this identifier to cite or link to this item: http://hdl.handle.net/10995/102603
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShimov, G. V.en
dc.contributor.authorBushueva, N. I.en
dc.date.accessioned2021-08-31T15:04:17Z-
dc.date.available2021-08-31T15:04:17Z-
dc.date.issued2020-
dc.identifier.citationShimov G. V. Study of the Manufacturing Options for an Asymmetric Plate Made of 12X18N10T Steel / G. V. Shimov, N. I. Bushueva. — DOI 10.1088/1757-899X/969/1/012075 // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 969. — Iss. 1. — 012075.en
dc.identifier.issn17578981-
dc.identifier.otherFinal2
dc.identifier.otherAll Open Access, Gold3
dc.identifier.otherhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85097428409&doi=10.1088%2f1757-899X%2f969%2f1%2f012075&partnerID=40&md5=a98ecb0e4ca5fa45f73e0d497ddd51d9
dc.identifier.urihttp://hdl.handle.net/10995/102603-
dc.description.abstractThe analysis of possible options for manufacturing an asymmetric plate of 12X18N10T steel is presented. A phenomenological model of damage accumulation was used to analyse the probability of metal micro - and macro - destruction. The results of FEM modelling of technological processes of plate manufacturing are presented. Due to these results were made the conclusions about feasibility of their application based on the metal damage calculation. The choice of a rational technology to produce a plate is justified, in which the greatest metal ductility reserve takes place at a dangerous point. According to the proposed scheme, an experimental batch of plates have been made. © Published under licence by IOP Publishing Ltd.en
dc.format.mimetypeapplication/pdfen
dc.language.isoenen
dc.publisherIOP Publishing Ltden
dc.rightsinfo:eu-repo/semantics/openAccessen
dc.sourceIOP Conf. Ser. Mater. Sci. Eng.2
dc.sourceIOP Conference Series: Materials Science and Engineeringen
dc.titleStudy of the Manufacturing Options for an Asymmetric Plate Made of 12X18N10T Steelen
dc.typeConference Paperen
dc.typeinfo:eu-repo/semantics/conferenceObjecten
dc.typeinfo:eu-repo/semantics/publishedVersionen
dc.identifier.doi10.1088/1757-899X/969/1/012075-
dc.identifier.scopus85097428409-
local.contributor.employeeShimov, G.V., Department of Metallurgy and Materials Science, Ural Federal University Named after the First President of Russia B. N. Yeltsin, 19, Mira Str., Ekaterinburg, 620049, Russian Federation
local.contributor.employeeBushueva, N.I., Department of Metallurgy and Materials Science, Ural Federal University Named after the First President of Russia B. N. Yeltsin, 19, Mira Str., Ekaterinburg, 620049, Russian Federation
local.issue1-
local.volume969-
local.contributor.departmentDepartment of Metallurgy and Materials Science, Ural Federal University Named after the First President of Russia B. N. Yeltsin, 19, Mira Str., Ekaterinburg, 620049, Russian Federation
local.identifier.pure20233094-
local.identifier.pureaaef27e4-4010-494c-908a-67b00e3a9c57uuid
local.description.order012075-
local.identifier.eid2-s2.0-85097428409-
Appears in Collections:Научные публикации, проиндексированные в SCOPUS и WoS CC

Files in This Item:
File Description SizeFormat 
2-s2.0-85097428409.pdf1,11 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.