Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://elar.urfu.ru/handle/10995/90225
Название: Effect of the method for producing Cu-Cr3C2 bulk composites on the structure and properties
Авторы: Eryomina, M. A.
Lomayeva, S. F.
Paranin, S. N.
Demakov, S. L.
Yelsukov, E. P.
Дата публикации: 2017
Издатель: Indian Academy of Sciences
Библиографическое описание: Effect of the method for producing Cu-Cr3C2 bulk composites on the structure and properties / M. A. Eryomina, S. F. Lomayeva, S. N. Paranin, S. L. Demakov, et al. . — DOI 10.1007/s12034-017-1457-2 // Bulletin of Materials Science. — 2017. — Vol. 5. — Iss. 40. — P. 1021-1028.
Аннотация: Copper-chromium carbide composites containing a carbide phase of 20-30 vol% were obtained with the use of solid- and liquid-phase mechanosyntheses, followed by magnetic pulse compaction (MPC) and spark plasma sintering. The morphology, structural-phase composition, density, hardness and electrical conductivity of the composites were investigated. The structure of composites obtained by MPC represents regions of copper matrix hardened by superfine carbide precipitates surrounded by a layer of chromium carbide. In the composites obtained by spark plasma sintering, the copper matrix hardened by superfine carbide precipitates was divided into areas surrounded by a copper-chromium layer. A composite obtained by the MPC of the powders synthesized using solid-phase mechanosynthesis (MS) (copper, chromium and graphite) had the highest values ofVickers microhardness (4.6GPa) and Rockwell hardness (HRA 69). The best value of electrical conductivity (36% IACS) was achieved using liquid-phase MS (copper, chromium and xylene) and spark plasma sintering. Liquid-phase MS is the only way to synthesize the powder with a small amount of the carbide phase and without contamination. © 2017 Indian Academy of Sciences.
Ключевые слова: CHROMIUM CARBIDE.
COPPER
MECHANOSYNTHESIS
NANOCOMPOSITES
CHROMIUM
COPPER
ELECTRIC CONDUCTIVITY
HARDENING
HARDNESS
LIQUIDS
METALLIC MATRIX COMPOSITES
NANOCOMPOSITES
SINTERING
SPARK PLASMA SINTERING
SYNTHESIS (CHEMICAL)
CARBIDE PRECIPITATE
CHROMIUM CARBIDE
ELECTRICAL CONDUCTIVITY
MAGNETIC PULSE COMPACTION
MECHANOSYNTHESIS
STRUCTURAL-PHASE COMPOSITION
STRUCTURE AND PROPERTIES
STRUCTURE OF COMPOSITES
CARBIDES
URI: http://elar.urfu.ru/handle/10995/90225
Условия доступа: info:eu-repo/semantics/openAccess
Идентификатор SCOPUS: 85029062145
Идентификатор WOS: 000410726400017
Идентификатор PURE: 2127381
ISSN: 0250-4707
DOI: 10.1007/s12034-017-1457-2
Сведения о поддержке: Government Council on Grants, Russian Federation
Federal Agency for Scientific Organizations: 0428-2014-0002, 0389-2014-0002
This work was supported by the Government of the Russian Federation (Federal Agency for Scientific Organizations) under the themes of the state task, no. 0389-2014-0002 and no. 0428-2014-0002 and by the Program of UD RAS, Project reg. no. AAAA-A17-117040610324-3.
Располагается в коллекциях:Научные публикации ученых УрФУ, проиндексированные в SCOPUS и WoS CC

Файлы этого ресурса:
Файл Описание РазмерФормат 
10.1007-s12034-017-1457-2.pdf388,3 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.