Synthesis of sulfide mineral crystals by incongruent methods using the example of Cu-Fe-S and Cu-Fe-Se systems

Abstract

Understanding the structure and thermodynamic properties of sulfide minerals is important for studying the paragenesis of sulfide formation on Earth and in space, as well as for analyzing technological issues in the processing of ores and polysulfide product concentrates. There is a lack of experimental and theoretical information on many representatives of the Cu-Fe-S and Cu-Fe-Se systems. Aim. To synthesize crystals in the Cu-Fe-S and Cu-Fe-Se systems at the lowest possible temperatures for the subsequent study of their physical properties, while solving the main problem of materials science related to interrelations between composition, structure, and properties. Materials and methods. Crystal synthesis was carried out by the solution-melt method in a stationary temperature gradient, in evacuated sealed quartz glass ampoules. Two types of ampoules were used in the experiment, standard and long. The ampoules were filled with a charge and a salt mixture of RbCl-LiCl of eutectic composition, evacuated and sealed, then placed in several quartz or ceramic glasses. The glasses were placed in tubular furnaces such that the ends of the ampoules with the charge were located closer to the center of the furnace, and the opposite ends were closer to the edge to create a temperature gradient. For standard ampoules, the hot end temperature was 520–469℃, and the cold end was 456–415℃. For long ones: 470℃ – hot end and 340℃ – cold. The synthesis duration ranged from three to four months. Results. Depending on the composition of the charge, crystals of chalcocine Cu2S, bornite Cu5FeS4, chalcopyrite CuFeS2, isocubanite CuFe2S3, and iron-containing dicopper sulfide with an iron content of up to 8 at % and various equilibrium associations with their participation and with the participation of pyrite FeS2 and pyrrhotites Fe1–xS were obtained. Copper dendrites were also found in some samples. In addition, crystals of a phase with the approximate composition of CuFeSe2 were obtained. It is shown that due to different combinations of oxidation states of all three elements dissolved in a salt electrolyte, it is possible to obtain phases with almost any stoichiometric ratio. Chalcopyrite and isocubanite are reliably detected using Raman spectroscopy. In this case, some samples are locally characterized by the “absence” of a spectrum, which probably indicates the metallic (semi-metallic) properties of the samples. Conclusion. Using the Cu-Fe-S and Cu-Fe-Se systems as an example, the possibility of obtaining sulfide crystals in a RbCl-LiCl salt melt up to a eutectic temperature of 313℃ is shown. Due to the low synthesis temperature, the synthesis should be carried out over several months, resulting in crystals a fraction of a millimeter in size. © 2024, AN Zavaritsky Institute of Geology and Geochemistry. All rights reserved.