Please use this identifier to cite or link to this item: http://hdl.handle.net/10995/102643
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShmakov, E.en
dc.contributor.authorFrizen, V.en
dc.contributor.authorNikolaev, D.en
dc.date.accessioned2021-08-31T15:04:32Z-
dc.date.available2021-08-31T15:04:32Z-
dc.date.issued2020-
dc.identifier.citationShmakov E. Research of various inductors configurations for heating titanium slabs / E. Shmakov, V. Frizen, D. Nikolaev. — DOI 10.1088/1757-899X/950/1/012029 // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 950. — Iss. 1. — 012029.en
dc.identifier.issn17578981-
dc.identifier.otherFinal2
dc.identifier.otherAll Open Access, Bronze3
dc.identifier.otherhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85096554349&doi=10.1088%2f1757-899X%2f950%2f1%2f012029&partnerID=40&md5=e008e32e5b34be5b94fa8c75d581ecc6
dc.identifier.urihttp://hdl.handle.net/10995/102643-
dc.description.abstractIn this paper various inductors configurations for heating a titanium slab, as well as the influence of frequency changes on efficiency of inductors are considered. The calculations are carried out by means of finite element method. In this research a three-dimensional time-harmonic model in A-formulation of Maxwell's equations is used. In the framework of this work, only electromagnetic problem was calculated, since the main aim of this work is to assess the effectiveness of inductor configurations in terms of electromagnetic problem. Efficiency of inductor and the uniformity coefficient introduced herein have been chosen as the comparison parameters. Ultimately, distribution of electromagnetic power density in the workpiece is shown, also conclusions are drawn for each of inductor configurations. © Published under licence by IOP Publishing Ltd.en
dc.format.mimetypeapplication/pdfen
dc.language.isoenen
dc.publisherIOP Publishing Ltden
dc.rightsinfo:eu-repo/semantics/openAccessen
dc.sourceIOP Conf. Ser. Mater. Sci. Eng.2
dc.sourceIOP Conference Series: Materials Science and Engineeringen
dc.titleResearch of various inductors configurations for heating titanium slabsen
dc.typeConference Paperen
dc.typeinfo:eu-repo/semantics/conferenceObjecten
dc.typeinfo:eu-repo/semantics/publishedVersionen
dc.identifier.doi10.1088/1757-899X/950/1/012029-
dc.identifier.scopus85096554349-
local.contributor.employeeShmakov, E., Department of Electrical Engineering and Electrotehnlogy Systems, Ural Federal University, Ekaterinburg, Russian Federation
local.contributor.employeeFrizen, V., Department of Electrical Engineering and Electrotehnlogy Systems, Ural Federal University, Ekaterinburg, Russian Federation
local.contributor.employeeNikolaev, D., Department of Electrical Engineering and Electrotehnlogy Systems, Ural Federal University, Ekaterinburg, Russian Federation
local.issue1-
local.volume950-
local.contributor.departmentDepartment of Electrical Engineering and Electrotehnlogy Systems, Ural Federal University, Ekaterinburg, Russian Federation
local.identifier.pure20228809-
local.identifier.puref019547b-365e-4805-a329-b2117f638207uuid
local.description.order012029-
local.identifier.eid2-s2.0-85096554349-
Appears in Collections:Научные публикации, проиндексированные в SCOPUS и WoS CC

Files in This Item:
File Description SizeFormat 
2-s2.0-85096554349.pdf37,78 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.