Please use this identifier to cite or link to this item:
|Title:||Technogenic Raw Materials in High-Alumina Chamotte Production|
|Authors:||Pavlova, I. A.|
Getman, A. A.
Farafontova, E. P.
|Publisher:||IOP Publishing Ltd|
|Citation:||Pavlova I. A. Technogenic Raw Materials in High-Alumina Chamotte Production / I. A. Pavlova, A. A. Getman, E. P. Farafontova. — DOI 10.1088/1757-899X/969/1/012031 // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 969. — Iss. 1. — 012031.|
|Abstract:||The paper presents studies on the production of a high-alumina aggregate with an Al2O3 content of 75% based on fine-grained corundum dust generated by grinding fused corundum. Finely dispersed corundum powder is a by-product and due to the low Al2O3 content (93 - 95%) is not used in further production. It is proposed to obtain high-alumina aggregate without joint grinding of the components. Aggregate was obtained by pressing through a "false grain"from a mixture of kaolin and corundum dust in a certain ratio. The samples firing was carried out at a temperature of 1700 C. The phase composition of the obtained aggregate is represented by 46 - 51% corundum, 45 - 49% mullite. The water absorption of such chamotte is 14 - 16%, open porosity is 33 - 35%, apparent density is 2230 - 2290 kg•m-3. Now, it was not possible to obtain a high-density filler grade ZML and ZMK that meets the requirements of GOST 23037 - 78. The production flow chart of high-alumina chamotte based on kaolin and corundum dust should include a joint fine grinding of the components, or a separate grinding of corundum dust until it passes completely through the 0.063 mm mesh. © Published under licence by IOP Publishing Ltd.|
|Appears in Collections:||Научные публикации, проиндексированные в SCOPUS и WoS CC|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.