Please use this identifier to cite or link to this item: http://hdl.handle.net/10995/92309
Title: Comparison of the resistance to cavitation and abrasive wear of deposited layers prepared from steels 06X19H9T and Fe-Cr-Ti-Al
Authors: Alwan, H. L.
Korobov, Yu. S.
Bessonov, N. O.
Smolentsev, M. S.
Lezhnin, N. V.
Razikov, N. M.
Razikov, M. N.
Issue Date: 2019
Publisher: Institute of Physics Publishing
Citation: Comparison of the resistance to cavitation and abrasive wear of deposited layers prepared from steels 06X19H9T and Fe-Cr-Ti-Al / H. L. Alwan, Yu. S. Korobov, N. O. Bessonov, M. S. Smolentsev, et al.. — DOI 10.1088/1757-899X/681/1/012001 // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 1. — Iss. 681. — 12001.
Abstract: The resistance of deposited layers to cavitation erosion and abrasive wear was evaluated for the steels AISI 321 (known as 06X19H9T manufactured according to the Russian standard GOST 18143-72) and Fe-Cr-Ti-Al (two materials namely Ural AS-3 and PPM-6). The Gas Tungsten Arc Welding (GTAW or TIG) process was utilized to deposit these welding material wires onto a medium carbon steel substrate AISI 1040. Cavitation test was conducted by using ultrasonic vibratory method to induce the erosion. In addition, a three-body abrasion test was used to evaluate the resistance of the studied materials to abrasive wear. The material loss criterion and wear rate of each material as a function to testing time were evaluated and discussed. The cavitation and abrasive wear tests have shown similar results regarding the PPM-6 steel. Among the tested material, PPM-6 exhibited the better resistance to cavitation and abrasion. The 06X19H9T stainless steel exhibited a higher resistance to cavitation comparing with the Ural AS-3. With respect to the abrasive wear, Ural AS-3 was to some degree better than the 06X19H9T in resistance to abrasion. © 2019 IOP Publishing Ltd.
URI: http://hdl.handle.net/10995/92309
Access: info:eu-repo/semantics/openAccess
SCOPUS ID: 85078260266
PURE ID: 12008360
ISSN: 1757-8981
DOI: 10.1088/1757-899X/681/1/012001
metadata.dc.description.sponsorship: Foundation for Assistance to Small Innovative Enterprises in Science and Technology, FASIE: 0035960
This work was done within the state order of IMP UB RAS on the subject no. AAAA-A18-118020190116-6, within the state order of IMP UB RAS on the subject ―Laser, and IES UB RAS on the subject no. AAAA-A18-118020790147-4. The present study was supported by FASIE, program Development-NTI 2017, project No. 0035960.
Appears in Collections:Научные публикации, проиндексированные в SCOPUS и WoS CC

Files in This Item:
File Description SizeFormat 
10.1088-1757-899X-681-1-012001.pdf699,76 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.