Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://hdl.handle.net/10995/83169
Название: Rheological Characteristics of Loam Compositions with Mineral Additives of Different Genesis and Morfology
Авторы: Shakhov, S. A.
Nikolaev, N. Y.
Дата публикации: 2018
Издатель: Knowledge E
Библиографическое описание: Shakhov S. A. Rheological Characteristics of Loam Compositions with Mineral Additives of Different Genesis and Morfology / S. A. Shakhov, N. Y. Nikolaev // Russian Forum of Young Scientists (RFYS) (Ekaterinburg, Russia, 27–28 April , 2017). – Dubai : Knowledge E, 2018. – KnE Engineering, 3 (5). – pp. 195-204. – DOI 10.18502/keg.v3i4.2242
Аннотация: Structural clay products manufacturing is depends on the potential of local raw materials. Shoddy silty loams are the main component of molding mixtures in view of shortage of the quality clays. Therefore, methods for determining the structural characteristics of molding compounds are becoming important. The objective of study is the influence of mineral additives different genesis and morphology at structural characteristics and molding properties of the compounds based on shoddy silty loams. Photometrical sedimentometer FSH-6K and optical microscopy method were used for the determining of granulometric compositions and morphological properties of the additives. Conical rheometer method was used for the determining plastic strength of the moulding compounds. Shear plastometer method was used to determining values of the low elastic, high elastic and plastic deformations. It had defined the optimal values of molding clay compound's moisture in which molding compositions had being tested. Optimal values of the molding composition's moisture in which molding compounds has not subjected to negative influences of the gravitational water are equal to 15-19%. Structural constants were calculated for molding compositions based on different kinds of additives. Values of the percent of low elastic, high elastic and plastic deformation were calculated on the grounds of rheological curves. Optimal values of composition's structural characteristics were accepted from the condition of three types of deformations.
URI: http://hdl.handle.net/10995/83169
Условия доступа: Creative Commons Attribution License
Текст лицензии: https://creativecommons.org/licenses/by/4.0/
Конференция/семинар: Russian Forum of Young Scientists (RFYS)
Дата конференции/семинара: 27.04.2017-28.04.2017
ISSN: 2518-6841
DOI: 10.18502/keg.v3i4.2242
Источники: Russian Forum of Young Scientists (RFYS). — Ekaterinburg, 2018
Располагается в коллекциях:Междисциплинарные конференции, семинары, сборники

Файлы этого ресурса:
Файл Описание РазмерФормат 
10.18502_keg.v3i4.2242.pdf2,48 MBAdobe PDFПросмотреть/Открыть


Лицензия на ресурс: Лицензия Creative Commons Creative Commons