Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://hdl.handle.net/10995/111161
Название: Application of Water-Air Cooling Technologies for Heat Treatment of Bearing Rings
Авторы: Yaroshenko, Y. G.
Lipunov, Y. I.
Smakhanov, A. B.
Stolyarova, M. V.
Дата публикации: 2018
Издатель: National University of Science and Technology MISIS
National University of Science and Technology MISiS
Библиографическое описание: Application of Water-Air Cooling Technologies for Heat Treatment of Bearing Rings / Y. G. Yaroshenko, Y. I. Lipunov, A. B. Smakhanov et al. — DOI 10.3390/su14052699 // Izvestiya Ferrous Metallurgy. — 2018. — Vol. 61. — Iss. 6. — P. 423-430.
Аннотация: The paper presents the results of mathematical modeling and experimental researches executed during the development of the technology of differential water-air cooling of bearing rings made of 52100 (EN1.3505) steel produced by JSC “Vologda Bearing Plant”. Overlapping the mathematical model of temperature variation curves across the bearing cross-section on the thermokinetic diagram of the decomposition of supercooled austenite calculated according to the mathematical model developed by JSC VNIIMT has shown that a required microstructure of the heat-treated metal is achieved in a wide range of differentiated water-air cooling modes. Experimental studies of heat-strengthening of bearing rings by water- air jets were carried out on a specially assembled experimental industrial device with a cooling system equipped with mixers and collectors with flat-jet nozzles of the original design that ensure the stability of the torch and the uniformity of spraying the water-air mixture over a wide range of flow rates and water and air pressure. The thermal hardening of the rings carried out at various cooling regimes, followed by the determination of the mechanical properties and structural characteristics of the steel, has confirmed that the water-air cooling technology achieves the required structural and mechanical characteristics of the bearing rings and is a competitive, environmentally friendly alternative to the technology of volume quenching in oil tank. © 2018, National University of Science and Technology MISIS. All rights reserved.
Ключевые слова: BEARING STEEL
HARDNESS
HEAT TREATMENT
MATHEMATICAL MODELING
MICROSCOPIC STRUCTURE
NOZZLE
QUENCHING
WATER-AIR COOLING
URI: http://hdl.handle.net/10995/111161
Условия доступа: info:eu-repo/semantics/openAccess
Идентификатор SCOPUS: 85051439186
Идентификатор PURE: 7758971
ISSN: 0368-0797
DOI: 10.3390/su14052699
Располагается в коллекциях:Научные публикации, проиндексированные в SCOPUS и WoS CC

Файлы этого ресурса:
Файл Описание РазмерФормат 
2-s2.0-85051439186.pdf570,77 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.